Simpson Strong-Tie HGLTV3.514 3-1/2 x 14 Top Flange I-Joist Hanger
-
By A Mystery Man Writer
-
-
4.9(520)
Product Description
Simpson HGLTV hangers are designed for use with structural composite lumber header applications that require high loads. The top flange nails are sized and specifically located to prevent degradation of the header due to splitting of laminations. The Strong-Tie HGLTV top flange hanger features a Gray Paint finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.
1-3/4-in x 14-in Joist Hangers at
Simpson HGLTV hangers are designed for use with structural composite lumber header applications that require high loads. The top flange nails are sized and specifically located to prevent degradation of the header due to splitting of laminations. The Strong-Tie HGLTV top flange hanger features a Gray Paint finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.
Simpson Strong-Tie HGLTV3.514 3-1/2 x 14 Top Flange I-Joist Hanger
Simpson Strong-Tie HGLTV3.514 Top Flange I-Joist Hanger 1/2 x 14 **SALE**
The BA is designed for engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. The BA features minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads.
Simpson Strong-Tie BA1.81/11.88 1-3/4 x 11-7/8 Top Flange Hanger
Simpson BA1.81/9.25 Top Flange I-Joist Hanger - G90 Galvanized
Simpson Strong-Tie ITS Galvanized Top-Flange Joist Hanger for 1-3
Simpson Strong Tie HGLTV3.514 Heavy Duty Hanger
Simpson Strong-Tie ITS Galvanized Top-Flange Joist Hanger for 3-1
Mackenzie Milne
Building Materials - Fasteners - Industrial
Wood Construction Connectors, PDF
ITS3.56/16 - Truss Joist Size: 3-1/2 x 16 Simpson Strong-Tie ITS3.56/16 sets a new standard for engineered wood top flange hangers. The ITS3.56/16 installs 3-1/2 x 16 I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8 to 1 1/2 .