Bolt Hanger – CMI Corporation

Product Description

CMI Bolt hangers were originally designed to be used in the ropes course market to be fastened to a tree or pole with a 5/8" lag screw.  The larger than normal size helps to facilitate tree overgrowth and allow extra time to keep using the hanger.  They are not to be used for climbing or slacklining.  One quarter inch.
1 Tubular webbing with bartacked loops provides multiple attachment points.

Strength:
    Loops: 3400lbs
    End to End: 4000lbs
Material: 1 tubular webbing .
A continuous length of tubular nylon webbing is bar tacked and reinforced to yield a classic stirrup. Sold singly in assorted colors for easy identification, available with 3, 4 or 5 steps.

CMI Bolt hangers were originally designed to be used in the ropes course market to be fastened to a tree or pole with a 5/8 lag screw. The larger

Bolt Hanger

Hillman 731 Hanger Bolt 1/4 x 2 1/2 In. 20-Pack,Zinc

CMI Corporation

Genuine OEM Mitsubishi factory replacement Evo 7/8/9 exhaust hanger bolt for the back muffler section. M8 x 40mm bolt. See diagram images for exact

Mitsubishi Exhaust Hanger Bolt (C Muffler) for Evo 7/8/9 (MF244859)

Top Hangers - Uniplast Industries Inc. - Global Sustainable Hanger

MC-33 Hanger Plate Carrier with Uprights - Mifab

Conductix-Wampfler USA

Garvin Southwire Conduit Hanger With Bolt And Nut 3 Inch EMT Or

Conductix-Wampfler USA

CMI Bolt Hanger

Conductix-Wampfler USA