Allfuelhst Wall Thimble for 6 inch Diameter Chimney Pipe
-
By A Mystery Man Writer
-
-
5(503)
Product Description
The Wall Thimble is used for through-the-wall chimney installations. It protects the wall as the chimney passes safely through to the outside, and provides a finished look to the framed opening on the inside.The Wall Thimble can adjust to accommodate walls from 6 to 10 inches thick.
The 15° Elbow Kit is used to get past rafters or away from an obstruction like plumbing, HVAC, or the roof peak. Up to 2 lengths of chimney pipe (for a maximum run of 72 in. between elbows) can be added between elbows to allow for necessary spacing. An Elbow Strap is included and helps support the weight of the offset from the elbows. If your installation includes 2 lengths of pipe between the elbows a second Elbow Strap (sold separately) is required.
AllFuel HST 15 Degree Elbow Kit for 6-Inch Inner Diameter Chimney Pipe
6 Inner Diameter x 18 Long Double Wall Chimney Pipe – AllFuel HST
This kit includes equipment used to vent a wood stove up, out horizontally through a wall, using a tee to transition the chimney pipe back vertical
AllFuel HST 6-Inch Through The Wall With Single Wall Black Pipe Wood Stove Chimney Kit - BS-TEESBKIT-6
AllFuel HST 11-inch Square Ceiling Support Box for 8-Inch Inner Diameter Chimney Pipe
AllFuel HST Firestop Radiation Shield for 6 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe
Our through the wall kit should be used whenever venting through the ceiling is not an option or is not desired. Note: venting straight up through the ceiling is always recommended for the strongest possible draft. This kit includes all the components you need to connect the single wall stove pipe to Class-A double wall insulated pipe, pass through an exterior wall, make a 90 degree turn, and top off the installation with a chimney cap.
Through The Wall Kit for 6 Chimney Pipe with Chimney Cap
6'' DuraTech Wall Thimble - 9443
AllFuel HST Attic Insulation Shield for 6 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe
Our through the wall kit should be used whenever venting through the ceiling is not an option or is not desired. Note: venting straight up through the ceiling is always recommended for the strongest possible draft. This kit includes all the components you need to connect the single wall stove pipe to Class-A double wall insulated pipe, pass through an exterior wall, make a 90 degree turn, and top off the installation with a chimney cap.
